2
SPECIFICATIONS
Magnification ............................................... 3x
Intensifier tube ............................................ Gen. 2 or Gen.3
Field of view ................................................ 14°
Range of Focus ........................................... 3 m to infinity
Power Supply .............................................. 3 V, CR123A type
Battery Life (CR123A type) ......................... 60 hours
Operating Temperature .............................. -40°C to +50°C
Storage Temperature ................................. -50°C to +70°C
Dimensions ................................................. 212 x 150 x 75 mm (8.4” x 6” x 3”)
Weight ......................................................... 0.82 kg (1.8 lbs)
* ATN reserves the right to change the above specifications at any time without notice
FEATURES
• Available IITs: 2+, CGT, HPT, WPT™, 3 and 3A
• Detachable Long Range Infrared Illuminator
• Multi-coated all-glass optics
• Adjustable Interpupillary Distance
• Built-in Flood Infrared Illuminator
• Water and fog resistant
• Limited Two-Year Warranty
APPLICATION
The NVB3X is a medium range night vision bi-ocular. The NVB3X combines a high quality
image intensifier tube with a two eyepieces that lets the user comfortably look through the
unit with both eyes. The NVB provides the user with excellent resolution and a wider field
of view then other units.
The NVB3X is available with a wide range of image intensifier options to meet a wide array
of specification requirements.
The NVB3X is a complex opticoelectronic system for individual use. The device con-
sists of the objective lens assembly, eyepiece and the body. The body contains a image
intensifier tube assembly with an integrated high voltage power source and the battery
housing.
Objective lens protective cover (not shown) is intended to protect the objective lens from
dust and scratches. It also will act as a daylight filter, allowing you to test the scope in day-
light or other bright light situations. The pinhole in the center of the protective cover allows
the user to check the operation ability of the device in daylight conditions.
NOTE:
Do not test the scope in daylight conditions even with the daylight filter/lens cap on
for more than ten (10) minutes.
