4-6
A
B
C
C. INFRAREd (IR) ILLUMINATOR OpERATIONS
CAUTION
The IR illuminator is a light that is invisible to the unaided
eye for use during conditions of extreme darkness.
However, the light from the illuminator can be detected by
others that are using night vision devices.
NOTE
The purpose of the illuminator is for viewing at close distance up
to 3 meters when additional illumination is needed.
IR Illuminator gets activated when the monocular is already
on by holding button (A) pressed for 1,5-2 seconds. A red light
appears in the eyepiece to indicate that the IR illuminator
is
operating.
You may focus the IR light for additional distance by placing the
focusing lens of the IR pivot plate (B) onto the window of the IR
illuminator (C). This will extend the range the useful range of
the IR.
Figure 4-4
Infrared (IR) Illuminator Operations
Summary of Contents for Multi Purpose Night Vision NVM14-3
