background image

4

450 mw infa-ed illminato

The 450 mW IR Illuminator is powered 

by a separate from the main unit bat-

tery. To install the battery unscrew 

the cap and insert a battery the way 

shown at the diagram on the IR. 
To install the 450mW IR Illuminator 

onto the bi-ocular loosen the clamp 

of IR Illuminator, insert his rail into 

the bracket of bi-ocular and screw the 

clamp.
The IR illuminator control buttons are located on its side. To switch the Digital IR illumina-

tor on/off press “+” and “-” buttons simultaneously. When the IR illuminator is switched 

on you can see the green LED lit.  By pushing the buttons “

+” and “-” you may adjust the 

IR  brightness.
The IR beam is focusable to change the field of coverage. To change the beam width 

slightly turn the IR lens.
You could change the IR control panel fitting your needs. The screw-tool from the kit 

should be used for weakening the clamp located on the IR. Rotate the IR placing it in the 

most convenient position. Tighten the clamp with the screw-tool to fix the new position.

Stoage  and cae

• If the device is not to be used for extended period of time (more than 10 days) remove 

the battery.

• Avoid touching lenses.  If fingerprints or traces of dirt or dust appear, clean their surface 

with a Photographic lens cleaning tissue.

• Keep lens cap/daylight filter on when not in use.
• The NVB5X is not harmful to the user or the environment.
• Do not disassemble except to clean the front lens and eyepiece: 

it will void your war-

ranty.

• Evaluate the scope function by looking through it in a lit environment 

with the daylight 

filter lens cap on.  never use in daylight without the daylight filter lens cap on. 

• 

never point the nVB5X at a bright light source. 

• Adverse atmospheric conditions such as fog, smog, or haze and a lack of ambient light 

(moon or starlight) may diminish the effective viewing distance.

• If you use the rubber eyecaps for a long period of time, you may suffer skin inflammation. 

If you develop any symptoms, consult a doctor immediately.

Battery 

Housing

Clamp

IR Elevation

IR Windage

IR Focusing

IR Brightness Adjustment

Summary of Contents for NVB5X-CGT









Reviews: