4
SLEEP MODE
One of the greatest new features that your Smart scope has is the SLEEP mode. This feature has
been designed to considerably extend the period of scope’s functioning, to set the scope to memo-
rize your initial settings and endure battery’s life (by settings we mean only digital settings which
include brightness of the tube, brightness of the reticle, and magnitude of the IR.) Here is a descrip-
tion as to now the sleep mode functions:
The scope will automatically shut down if it does not sense any activity (i.e. pressing any of the but-
tons or simply moving the scope back and forth away from your face) for 20 minutes. When activat-
ing the sleep mode the scope will first warn you by turning off the reticle for 10 seconds. If you intend
to keep using the scope simply touch any key and the scope will reactivate.
One of the reasons for the SLEEP mode being programmed into your scope is to keep the image
intensifier tube and batteries safe in case you forget to turn your unit off. If you notice that the reticle
turned off after 20 minutes just push the SL button and the scope will return to its previous settings.
To put your scope in the “SLEEP” mode any time, just push the SL button and “-” simultaneously.
Push SL to return to previous settings and the SMART scope will remember them. This feature will
come very handy, if you are waiting for game to come: you can prepare all of the settings, place
the unit in SLEEP mode and activate it precisely when you need it. To disable the proximity sensor
press SL and “+” simultaneously. In order to turn the proximity sensor back on, press SL and “+”
simultaneously again.
NOTE:
The scope is capable of running in SLEEP mode for more than 10 (ten) days and is ready for
use at any moment. Remember, you don’t have to turn the unit off while you are using it “Smart” sight
remembers all the settings). Use the master ON/OFF switch only to store the scope.
PROXIMITY SENSOR
If you turn the proximity sensor on it will activate the
scope when brought to your eye. The proximity sensor
disables the scope when you take it away from your
face. This feature has been introduced to prolong the
life of the tube and the battery.
To turn the proximity sensor on press SL and + at the
same time.
To disable the proximity sensor press SL and + at the
same time again.
NOTE:
Proximity sensor would not turn on automatically
after master power has been switched on.
Proximity sensor
