3
operation
Insert the two Lithium batteries (123A type) into the unit accord-
ing to the polarity indications on the battery compartment. Press
the ON/OFF button to turn the monocular on. Remove the lens
cap.
Adjust the proper eyepiece diopter and objective lens focusing.
The rotation of the Focusing Ring changes the position of the
objective lens in respect of the receiver focal plane array. In this
way the operator can adjust the unit in order to see the targets at
various ranges with the same good contrast.
Cover protects the objective assembly from mechanical damage.
The operator can adjust the eyepiece diopter of the monocular for his/her own eyesight by rotating
Eyepiece Diopter Adjustment Ring.
Eyecup provides for the comfortable eye position and for the
prevention of flash reflections onto the operator’s face which is
critical in the field and tactical activities.
Select the desired operation mode by pressing the switchboard
buttons.
With the «ZOOM» button you can activate a gradual adjustment
of the digital zoom preset in the monocular adjustments.
The «POLARITY» button switches the direct display mode into
the reverse one, i.e. from hot-white/cold-black into hot-black/
cold-white mode.
Each short push of the buttons «BRIG» or «BRIGHTNESS –» raises or lowers the dis-
play brightness, correspondingly, in stepwise way.
To turn the monocular off press the ON/OFF button.
video
output
The monocular incorporates a sealed Connector used for vid-
eo transmission and to connect external power sources. The
package of the thermal monocular OTIS-10 includes external
connection RCA Video/power adapter. This adapter attaches
the monocular to the video facilities for video recording or video
transmission to the external display, though at the same time it
accepts the external power supply.
ImpoRTAnT: when the unit is to be powered with external
sources, first make sure the batteries have been taken out.
external
power
source
IMPORTANT: When the unit is to be powered with external sources, first make sure the batteries
have been taken out.
To connect an external power source you can use any of the cables of the monocular package. As
an external power source, a standard network controller with outer voltage of 6V and current of over
0.5A can be applied.
Remove the protective cover off the connector input and attach the cable. To connect an external
source, we recommend you to use a 6mm standard double-pole socket in the way the positive con-
tact is the central contact.
External Power
Supply Connector
Video Connector
