5
5x A-FocAl lEns
(optional)
The
Trident Pro 2 with optional A-focal lens can be
used as a powerful 5x scope. To install A-focal lens
screw it into the front lens of Trident Pro 2.
wARnIngs And cAuTIons
• Always remember to turn off the ATN Trident Pro scope when it is not in use. If you do not plan on
using your scope for a period of more than 10 days, you should remove the batteries.
• Keep lens cap on when not in use.
• Avoid contact with dust, steam, and gas.
• The scope are not harmful to the user or the environment.
• Do not disassemble:
it will void your warranty.
• Evaluate the scopes function by looking through it in a lit environment with the lens cap put on.
Never use in daylight without the daylight filter lens cap on. Do not surpass ten minutes of test-
ing.
• Never point the scope at a bright light source.
• Adverse atmospheric conditions such as fog, smog, or haze and a lack of ambient light (moon or
starlight) may diminish the effective viewing distance. All technical data for this unit was compiled
in a controlled environment.
• If you use the rubber eyecaps for a long period of time, you may suffer skin inflammation. If you
develop any symptoms, consult a doctor immediately.
TRoublEshooTIng
Q:
Flashes, flickers, or clicking occur while operating
s:
If it occurs within the first five minutes of inserting new batteries, it is normal and the device will
resume normal operation soon thereafter. If it occurs for more than 10 minutes, contact your dealer
or other authorized service representative for service instructions.
Q:
Dark spots on screen.
s:
This may be dust on the lens, please clean according to instrutions. They may also be Cosmetic
blemishes in the intensifier tube which are a by-product of the manufacturing process. This is normal
and will not affect the life or performance of the unit.
Q:
Image not clear.
s:
Adjust diopter ring. If problem persists, increase viewing distance
Q:
Fixed-pattern noise in a honeycomb shape.
s:
Usually a cosmetic blemish characterized by a faint honeycomb-type pattern. This usually occurs
when viewing very bright lights.
Q:
A pattern of dark thin lines which look like chicken wire.
s:
Turn on illuminator, if purchased. If illuminator doesn’t brighten image, replace batteries. If prob-
lem persists, contact ATN for service instructions.
