Page 19/32 (26/21)
Mounting the abduction wedge
depth adjustment
The receptacle for the abduction wedge is
located below the seat surface in the front
area.
Place the abduction wedge with the desired
depth in the holder and secure the abduc-
tion wedge with the clamping lever.
Make sure that the abduction wedge is
securely in place and that the handle of
the clamping lever is turned backwards
after securing as shown in the illust-
ration.
Assembly and adjustment of the
fixation vest and seat pants
On the back of the seat shell are folding
buckles with which you can secure and
adjust the fixation vest.
To do this, thread the safety straps through
the slots at the appropriate height.
Make sure that the folding buckles are
well closed when securing the user with a
fixation vest.
The seat pants are secured equivalent to
the fixation vest under the seat surface.
Fig. 7
Fig. 8
Assembly and adjustment
