INSTALLATION MANUAL
1. MOUNT GUN
Mount the gun on a 13mm diameter rod on a mounting fixture or spray machine. See Fig 1 and
Fig 2. The tip of the gun should be 300mm from the surface of the work piece.
2. CONNECT THE AIR LINES
Clean all lines and connections of dirt, burrs etc. and blow them out with clean air before
connecting to the system. The air supply line should contain an air filter to remove harmful dirt
and moisture from the compressed air. Use a normally closed 3-way air solenoid valve to
control the spray gun. Attach a grounded air supply line from the 3-way valve to the 1/4" elbow
air inlet adapter of the gun.
3. CONNECT THE FLUID LINES
Connect a grounded fluid line from the pump to the 1/4" PF fluid inlet adapter of the gun. You
should install a fluid pressure regulator to control fluid pressure to the gun. In a circulating