59
■
After a fuse is replaced
●
A light bulb may need to be replaced if the lights do not turn on after the fuse has been replaced.
● If the replaced fuse blows again, have the vehicle inspected by your local authorized dealer.
■
Blown fuse
A fuse is designed to blow before the entire wiring system is damaged.
Caution
■
Replacing fuses
If the fuse continues to blow, do not replace with another fuse until the electronic
overload issue has been fixed.
Light bulbs
You may replace the following light bulbs. The difficulty level of replacement varies depending on the light bulb. If light bulb
replacement seems to difficult to perform contact your local dealer.
■
Light bulb replacement
Turn on all light switches to check that light bulbs are working. If the light does not work, generally it is caused by a blown
fuse or bad bulb. First check the fuse and if the fuse is working correctly check the light bulb. If fuse is not working, replace
fuse. If both fuse and light bulb are functioning properly take the vehicle to your local dealer for service.
Check that all instruments and warning lights are working properly.
Warning
■
To prevent system breakdowns and vehicle fire
Observe the following warnings.
Failing to do so may cause damage which could lead to break downs or fire.
●Never use a fuse of a higher amperage rating than indicated or use any other
object in place of a fuse.
●Always use a genuine fuse provided by our company. Never replace a fuse with
a wire. This will cause extensive damage or may cause a fire.
●
Do not modify the fuse or the fuse box.
Summary of Contents for COUPE & TRUCK
