STEP 11:
Rotate table approximately 90 degrees as shown. With the help of another adult hold the table in this position to install
P7
Goal Box Support Frames with Curved and
P8
Goal Box Support Frames using
H1
Screws as shown in
FIGURE 11A
.
Slide
P10
Goal Box Panels between
P7
Goal Box Support Frames with Curved on each end of table as shown in
FIGURE 11B
.
Important Note: Be careful not to strip these screws. All H1 Screws must be tight - but not stripped.
PARTS REQUIRED
12 pcs -
H1
Phillips Flat Head Screw
4 pcs -
P8
Goal Box Support Frame
4 pcs -
P7
Goal Box Support Frame with Curved
2 pcs -
P10
Goal Box Panel
10
© 2013 Escalade Sports
For Customer Service Call 1-886-996-2729
All Right Reserved.
CAUTION! PINCH POINTS
ROTATE TABLE ONLY WITH ADULT SUPERVISION
FIGURE 11A
P7
P8
P8
P7
H1
H1
H1
H1
H1
H1
P7
P8
P8
P7
Groove face
inside
.
FIGURE 11B
ATOMIC
P7
P7
P10
Atomic Jelly
logo on this
side.
P10
Groove face
inside
.
P8
Pilot hole
on this side.
