7
© 2013 Escalade Sports
For Customer Service Call 1-886-996-2729
All Right Reserved.
PARTS REQUIRED
6 pcs -
H9
Phillips Flat Head Screw
2 pcs -
H13
Hex Nut
2 pcs -
H10
Male Pivot Assembly
1 pc -
P1
Pool Table
2 pcs -
H12
Flat Washer
1 pc -
T1
Wrench
STEP 5:
Attach
H10
Male Pivot Assembly to each end apron using
H9
Screws as shown in
FIGURE 5
and
DETAIL A
.
Secure each
H10
Male Pivot Assembly with
H12
Washer and
H13
Nut as shown in
FIGURE 5
and
DETAIL A
.
Use
T1
Wrench to tighten each
H13
Nut.
Important Note: Be careful not to strip these screws. All H9 Screws must be tight - but not stripped.
IMPORTANT NOTE: BEFORE INSTALLING PLAYFIELD SCREWS - PLEASE BE SURE ALL
PARTS HAVE BEEN REMOVED FROM INNER CABINET AND AIR MOTOR CORD IS BROUGHT
THROUGH THE HOLE IN SIDE PANEL.
Motor Cord
H9
H10
H12
H13
P1
FIGURE 5
DETAIL A
H9
H10 H12
H13
PARTS REQUIRED
24 pcs -
H2
Phillips Washer Head Screw
1 pc -
P2
Hockey Table
STEP 6:
With the help of another adult, carefully install
P2
Hockey Table into
P1
Pool
Table using
H2
Screws as shown in
FIGURE 6
.
IMPORTANT, be sure to feed the plug end from the fan motor through
the hole in the side apron. Be careful not to strip these screws.
All H2 Screws must be tight - but not stripped.
H2
H2
P2
FIGURE 6
P1
IMPORTANT NOTE:
Do not run cord through Side Pocket hole.
Use holes beside the Side Pocket.
