User manual Version 1.0
ABLELink
®
GPRS Serial Server SG6001
Copyright © 2004 Atop Technologies, Inc.
When it has successfully connected to GGS, a new screen will appear. Please refer to
the following picture for the description of each part.
GGS Server IP Address
appears on the top of the screen.
GDT Group Name
refers to the name of the GDT Group.
Default Group
is
automatically generated by the program.
GDT
will appear on the right side of the screen once any GDT is added and successfully
connected. When there is no GDT found, this part will appear blank.
GGS Connection Status
appears at the bottom of the screen. A yellow sign with
On
Line
indicates that it has successfully connected to the GGS. A cross sign with
Off Line
indicates that it is disconnected to the GGS. Please note that there is no time limit for
idle. Once your ADM connects to GGS, it keeps connecting until you select Exit (right-
click on GGS) to leave ADM.
4.2.2.2. To Configure GDT Group
A. To ADD a New GDT Group
All rights reserved. Designed in Taiwan.
40 / 71