User manual Version 1.0
ABLELink
®
GPRS Serial Server SG6001
Copyright © 2004 Atop Technologies, Inc.
Password:
Enter the password for the GDT.
GGS:
Enter the IP Address or Domain Name of the GGS Server.
DNS:
If you enter the Domain Name in the field of GGS, you need to provide a Domain
Name Server here, or the Domain Name of the GGS cannot be interpreted. If you
provide IP Address in GGS field, you may leave DNS field empty.
GDT Group:
Choose a GDT Group from the drop-down menu.
GPS Interval:
Choose the interval for GPS to send information. The default value is 30
seconds.
SOS Tel:
Enter the telephone number for emergency
APN:
Enter the APN code of the Telecom Operator.
PIN:
Enter the PIN number.
SIM:
Enter the SIM card number.
GSM/PCS Band:
Select between 900/1800 and 850/1900.
Dial UP:
Choose the dial up number
ID:
Enter the ID
Password:
Enter the password for dial up.
Baud Rate:
The default value is 9600. Please select according to your device.
Data/Stop Bits:
The default value is 8/1. Please select according to your device.
Parity Bits:
The default value is none. Please select according to your device.
Description:
You may type the description as a remark for the GDT.
When all required information is entered, click on
Save
to add new GDT.
You may repeat the whole procedure to add new GDT to the GDT group.
When adding new GDT is complete, you may see the current status from GGS screen.
For example, there is one GDT in Group2 in the following screen.
All rights reserved. Designed in Taiwan.
51 / 71
