- 9 -
6. Installation and Debugging
⚠︎
Any erroneous installation, adjustment, refit, overhaul or maintenance may
cause property damage or personal injury. The work shall be performed by
authorized and licensed technicians, otherwise the manufacturer has the right not
to provide warranty service;
⚠︎
Only be installed in accordance with the local code. If no similar standard, you
should conform to the National Fuel Gas Code, ANSI Z223.1/NFPA 54, the National
Gas Installation Code, CSA-B149.1, or the L.P. Gas Installation Code, CSA-B149.2 as
applicable;
⚠︎
The appliance individual shutoff valve must be disconnected from the gas
supply piping system during any pressure testing of that system at test pressures
in excess of 1/2psi (3.45kPa).
6.1
、
Unpacking and Installation
⚠︎
Please dispose of all packaging materials and residues after unpacking;
⚠︎
Check the equipment. If it is damaged, please keep wrappers and receipts which
must be signed by the carrier representative (Driver), and contact the carriers to pursue
a claim within 15 days after receiving;
⚠︎
Be sure to install supporting legs before using, and do not tear up any label or logo
before normal using;
⚠︎
Please read these instructions carefully before installation and operation. Please
contact your local agent if you have any questions;
⚠︎
The equipment shall be installed on a level, solid, non-skid and incombustible
surface, and placed in a well-lighted work area with waterproof, and stay away from
children and customers;
