APD series bench scale
APD_01_11.05_EN_U
9
7. SYMBOLS ON THE DISPLAY
The display has symbols which show the scale’s functioning status; you will find the description for each symbol below.
DISPLAY
NUMBER
SYMBOL
FUNCTION
(1)
0
The weight detected on the weighing system is near zero, within the interval of –1/4
÷ +1/4 of the division.
(2)
~
The weight is unstable.
(3)
Not managed.
(4)
NET
The displayed weight is a net weight.
(5)
G
The displayed value is a gross weight, if the Italian or English language is selected.
(6)
B
The displayed value is a gross weight, if the German, French or Spanish language is
selected.
(7)
Indicates the battery charge level: see the section “LOW BATTERY WARNING”.
(8)
MAX=
MIN=
e=
When viewing the metric information, it identifies the indicated capacity range.
When viewing the metric information, it identifies the indicated minimum weigh range.
When viewing the metric information, it identifies the indicated division range.
(9)
LT
The locked tare is enabled.
(10)
PT
The manual tare is active.
(11)
W1
W2
W3
The instrument is in the first weighing range.
The instrument is in the second weighing range.
The instrument is in the third weighing range.
(12)
Scale nr. 1 is always shown.
