Copyright© 2008. All Rights Reserved by ATP Electronics Inc.
17
2. Backing up the GPS data from the Photo Finder
By connecting the ATP GPS Photo Finder directly to your PC via USB connection, you can back up all
the logged GPS position information. The ATP GPS Photo Finder will show up as a USB removable
drive and you can directly view the internal log information. You can copy this data anywhere on your
PC’s harddrive.
3. Troubleshooting
If you run into any problems using the ATP GPS Photo Finder, please see the troubleshooting
information table below. If the problem persists, please contact your local dealer or retailer.
The GPS data is not being synced to my pictures
Ensure that the time zone setting of your local time.
Ensure that the date format is set correctly to ‘YYYYMMDD’
Ensure that your camera time clock setting is turned ON.
When you choose your time zone offset, please take into account the possibility of Daylight
Savings Time.
Ensure that your GPS log time is correct.
The Photo Finder is unable to acquire a GPS signal
You may have used the Photo Finder in areas where the GPS device cannot receive a signal, for
instance in obscured areas such as in tunnels, underground or under tall buildings.
Inside a car there is a chance that the GPS signals will be reflected by glass.
It takes a long time to acquire a signal from the GPS satellites
It may take a long time to track a location depending on the positioning of the GPS satellites.
The Photo Finder will not power on.
Open the battery cover and re-insert the battery.
The battery may not be inserted properly.
The Photo Finder cannot transfer GPS data to my memory card.
You may be running on low battery power. The Photo Finder automatically disables this
process to avoid possible data corruption. Please replace the batteries with new ones.
You may have used a memory card that the ATP GPS Photo Finder cannot support.
The Photo Finder cannot connect with my PC and card reader.
You may be running on low power battery. Please replace the battery with a new one.
Please check the USB cable.
Please ensure to use the alkaline battery ( 1.5V x 2 ) is better than rechargeable battery.
( 1.2V x 2 )
