8
English
Polishing and Grinding Machine 10.122.9
Operating Manual
Important Notices
Please read this operating manual carefully and follow all the
•
instructions.
Become familiar with the device and its operation with the help of these
•
instructions
For your own safety, adhere to the general safety instructions
•
Always hand over this operating manual with the device should you
•
give it to other people
Before Start-Up
Before start-up, attach all covers and safety provisions correctly. For
•
this, pay attention to the assembly steps in the “Start-Up” chapter.
Check the polishing machine for damage before start-up.
•
See for yourself that all the data on the specification plate corresponds
•
to the network data of your electricity connection.
If you process wax and polishing agents with the machine, pay
•
attention to the respective instructions of the manufacturer.
Intended Use
The polishing machine is suited to the polishing of painted surfaces.
•
With the use of the corresponding accessories, the device can also be
•
used to grind different surfaces.
Pay attention to the safety instructions.
•
Technical changes to the machine principally preclude liability on the
•
part of the manufacturer.
Adhere to the applicable worker protection and accident prevention
•
rules.
General Safety Instructions
Please observe all safety instructions when using the device. For your
•
own safety and the safety of others, observe these instructions before
you use the device.
Keep these instructions in a safe place for later use.
•
The manufacturer is not liable for damages that arise due to incorrect
•
operation or use contrary to intended use.
In case of emergency, switch off the machine immediately and pull the
•
plug.
Pull the plug before all maintenance and set-up work.
•
Check the device for possible malfunctions before you work with it.
•
