Input power requirements
Before connected to the input power, power must first confirm the ground line has been
properly connected and also connected to the ground
| WARN
"on the ground terminal
body. The power plug on the instrument can only be plugged into a power socket with a
ground wire. Such as
I WAKZ1
[If you use an extension cord, you must pay attention to whether it has a ground
wire. This AC variable frequency power supply uses a three-core power cord. When the
cable is plugged into a socket with a ground wire, the body is grounded.
Environmental conditions of use
1.
Temperature: 0
o
C-40t
2.
Relative humidity: W80% RH
3.
High degree: at an altitude of 2000 meters above sea level.
4.
No gas, vapor, chemical deposit, dust, dirt and other explosive and corrosive media
that seriously affect the machine at the installation site;
5.
The installation site should be free from severe vibration or bumps.
2.3
Storage and transportation
Surroundings
APS series AC variable frequency power supply can be stored and transported under the
following conditions:
Ambient temperature the Temp 20C to to 60C
The height of the Height 7620 meters
This machine must avoid abrupt changes in temperature, which may cause moisture to
condense inside the body.
Packing
Original package
Please keep all the original packaging materials, if the machine must be returned to the
factory for repair, please use the original packaging materials. And please contact our
company's maintenance center first. When sending for repair, please be sure to return all
accessories such as the power cord together, please indicate the symptoms and
causes. Also, please note in the package "Easy Scrap" Please handle with care.
Other packaging
If you cannot find the original packaging materials to pack, please follow the instructions
below:
1, first with EPE bag or bubble pack the machine properly.
Summary of Contents for APS-4000 Series
Page 18: ......
