Atronic Harmony Slant Top, Installation Manual

8

June 2008

Harmony™ - Installation Manual

SAFETY INSTRUCTIONS

Further safety precautions during Installation,
Service and Maintenance

• The machine weight is approx. 125kg. Always use

appropiate equipment for transportation.

• Disconnect the power cable from the socket, befo-

re working at the machine.

• The machine may only be operated in 

dry conditi-

ons

 and must be connected to a 

grounded mains

power socket

.

• Check that all connectors are seated correctly. Fal-

se connections can cause irreparable damage, not
covered by warranty.

• For power cable routing remove the knock-out pla-

te on the appropriate side of the cabinet. Edge-
protection must be mounted once the knock-out
plate has been removed.

• Only qualified service personnel should perform

repairs.

• Electronic assemblies should only be changed with

the power switched off.

• Use only original Atronic parts for replacement.

• Atronic commboard and mainboard

Danger of explosion if battery is incorrectly repla-
ced! Check for correct polarity and replace with
the same or equivalent type only!

• The machine must not be cleaned using a high pres-

sure cleaner or a vapor jet and must not be instal-
led or operated in areas where high pressure clea-
ners or vapor jets are used. Use in dry conditions
only.

• Please refer to relevant Atronic service manuals

for further instructions on setup, operation and
maintenance.

S

AFETY

 I

NSTRUCTIONS