14
March 2006
Bill Acceptor - JCM UBA-10-SS
Pin Assignments
This is the pin assignment of the UBA-10 acceptor
for use in Atronic gaming machines. Interface type is
JCM
®
ID-003 with photo-coupler isolation activated.
Interface Connector
acceptor rear view
Pin
Signal Name
Function
1
+12V Power
Positive power supply (12V DC)
2
GND Power
Negative power supply (0V)
3
Master RESET
master reset signal line
4
TxD
Serial data transmit line
5
+12V I/F
12V DC Interface Power
6
RxD
Serial data receive line
7
GND I/F
Photo-coupler 0 Volt DC Interface Power
8
-
Not in use (Do not connect)
9
-
Not in use (Do not connect)
10
-
Not in use (Do not connect)
11
-
Not in use (Do not connect)
12
-
Not in use (Do not connect)
13
GND
RS232C, 0 Volt DC Interface Power
14
LED-Power
Test / Status LED anode
15
-
Not in use (Do not connect)
16
-
Not in use (Do not connect)
17
-
Not in use (Do not connect)
18
LED / Out-TTL4
Test / Status LED cathode
19
-
Not in use (Do not connect)
20
-
Not in use (Do not connect)
A
PPENDIX
acceptor front view
Pin
Signal Name
Function
1
-
reserved
2
-
reserved
3
TxD
Serial data transmit line
4
-
reserved
5
+12V Power
+12V DC Power
6
GND Power
0V DC Ground Plain
7
LED Power
LED Drive Line (anode)
8
LED -
LED Drive Line (cathode)
Front Bezel Connector
