35
3) Dismantle the swivel wheels on the Zirocco-M100
back end (Ø125 mm). Each wheel is installed with
four nuts. Install the new wheels.
IIgniterr Replacementt Guide
During the season 2018 Applied Turbine Technologies (ATT) introduced a
new generation of industrial jet turbines used in the Zirocco road drying
product line.
One of the important changes in the new turbine generation is the ability
for the operator to change the turbine igniter. It was earlier required to
stop the operation and send the turbine back to ATT for service.
The igniter is now placed accessible on the side of the jet turbine cover. If
an igniter needs to be changed, a spare igniter is available on the
machine and can be used instead. Changing the igniter does not require
special tools, it can be done by hand by following the instructions below.
Remove the cyclone, unlock the red
machine cover and remove it to get
access to the machines turbine
module.
Summary of Contents for Zirocco-M100
Page 1: ...Operating Manual Zirocco M100 Jet Dryer Cleaner...
Page 25: ...25 Dimensions...
Page 26: ...26...
