26
INSTRUCTIONS OF USE OF CONTROL PANEL
Discription of main display
.H\
1.
Operating modes of the regulator: IGNITION, STABILIZATION, FLAME CHECKING, MUTE,
EXTINGUISHING, STOPPING, CHIMNEY;
2.
Set boiler temperature – holding this will cause the change of the temperature;
3.
Currently measured boiler temperature;
4.
Main menu;
5.
Graphical display of operation:
ventilator
(fan);
feeder;
pump;
ignition coil .
6.
Currently measured DHW temperature;
7.
Set DHW temperature - holding it will cause the value to be adjusted;
8.
Time and date;
9.
External temperature;
10. Values affecting the set temperature, where the symbols mean:
- room thermostat contacts open - the set room temperature has been reached;
- reduction of the set temperature according to active time intervals;
