Instruction manual Civil V1.0 _ XX-09-2020 _ FttX-Distribution Closure AT29030 _ Page 4 of 6
12. Remove the housing from the packaging.
Pull the bundled cables / ducts through the
rectangular opening.
13. Place the housing on the base plate and
click it into place (clicks in 4 places).
14.
Wrap
the bundle of cables / ducts up in the
housing. Make sure to push the bundle
against the wall in the corners.
!! Make sure
the cables/ducts do not bend
while storing them back in the closure
!!
Do
not
bundle the cables / ducts in the
corners, only along the straight edges. If
necessary, slide the Velcro strip to a
different position.
15. Remove the lid from the packaging.
Check the foam strip for damage.
Brush the top edge of the housing to
remove any soil.
Place the lid on the housing.
“Click”
“Click”
