Blast chillers | User and maintenance manual | EN
41
Stop
Display
7KHGLVSOD\VKRZVWKHWLPHLQPLQXWHVLIDWLPHEDVHGF\FOHLVVHOHFWHGRUWKHWHPSHUDWXUHRIWKHFRUHSUREHLQ&IRUDSUREHF\FOH
The symbol “
µRQLQGLFDWHVWKHVHOHFWLRQRIDQHJDWLYHF\FOH
Keys
The key SET
, allows you to select the blast chilling cycle.
:KHQWKH6WDUW6WRS
button is pressed for 4 seconds, the controller will go into Stand-by.
3UHVVLQJWKH6WDUW6WRSEXWWRQEULHÁ\VWDUWVRULQWHUUXSWVWKHVHOHFWHGF\FOH
3UHVVLQJ8S
, Down
allows you to change the time or the temperature of the selected cycle.
,IWKHEX]]HULVDFWLYHZKHQWKH8S
EXWWRQLVSUHVVHGIRUWKHÀUVWWLPHWKHEX]]HUZLOOEHVLOHQFHG
Start
Display in blast chilling
7KHGLVSOD\VKRZVWKHWLPHOHIWLQPLQXWHVLIDWLPHEDVHGF\FOHLVVHOHFWHGRUWKHWHPSHUDWXUHRIWKHFRUHSUREHLQ&IRUDSUREHF\FOH
On the right side of the display, the symbol
LQGLFDWLQJWKDWWKHEODVWFKLOOLQJF\FOHLVLQSURJUHVVZLOOÁDVK
(YHU\PLQXWHVRQWKHGLVSOD\WKHZRUG´IUHH]HUµZLOODSSHDUIRUSRVLWLYHEODVWFKLOOLQJDQG´FKLOOHUµIRUQHJDWLYHEODVWFKLOOLQJDQGWKHWLPHHODSVHGZLOOÁDVK
,IWKHGRRULVRSHQFRQWDFWQRWFORVHGWKHZRUG´3$3µZLOODSSHDURQWKHGLVSOD\LQGLFDWLQJWKDWLWLVRSHQ
Keys
:KHQWKH8S
key is pressed, the chamber temperature is displayed.
When the Down
button is pressed, the time elapsed since the beginning of the blast chilling will be displayed for 5 seconds.
,IWKHEX]]HULVDFWLYHZKHQWKH8S
EXWWRQLVSUHVVHGIRUWKHÀUVWWLPHWKHEX]]HUZLOOEHVLOHQFHG
,IWKH6WDUW6WRS
EXWWRQLVSUHVVHGEULHÁ\WKHEODVWFKLOOLQJFRQVHUYDWLRQF\FOHZLOOEHVWRSSHG
WARNING
:KHQDSUREHEODVWFKLOOLQJLVVWDUWHGLIDIWHUPLQXWHVWKHHUURU´3Q6µDSSHDUVUHSRVLWLRQWKHSUREH
LQDPRUHVXLWDEOHPDQQHURWKHUZLVHWKHEODVWFKLOOLQJZLOOEHWLPHEDVHG
$WWKHHQGRIWKHSRVLWLYHEODVWFKLOOLQJSKDVHWKHV\VWHPZLOODXWRPDWLFDOO\JRLQWRFRQVHUYDWLRQPRGH
DWDWHPSHUDWXUHEHWZHHQDQG&DQGWKHZRUG´$8;µZLOOÁDVK
$WWKHHQGRIWKHQHJDWLYHEODVWFKLOOLQJSKDVHWKHV\VWHPZLOODXWRPDWLFDOO\JRLQWRFRQVHUYDWLRQPRGH
DWDWHPSHUDWXUHEHWZHHQDQG&DQGWKHZRUG´$8;µZLOOÁDVK
7RFRPSO\ZLWKWKHEODVWFKLOOLQJWLPHVSURYLGHGIRUE\ODZZKLOHDEODVWFKLOOLQJF\FOHLVLQSURJUHVVLWLV
QRWDGYLVDEOHWRRSHQWKHGRRURIWKH%ODVWFKLOOHU
6.1 ALARMS
The alarms present are those relating to the probes. They are shown only when the relative
probe needs to be displayed.
“Pr “
*HQHUDORULQWHUQDOHUURURIWKHSUREHV
“Pr1“
Chamber probe error
“Pr2“
Core probe error
“PnS”
Core probe not inserted correctly
If a blast chilling cycle is in progress and a core probe error is generated (Pr2), the cycle will be time-based, and
the error will remain displayed.
6.2 SETTINGS
Compressor
The compressor can be active only in start mode with the chamber probe not in error, the door must be closed
to give approval for the start-up of the compressor only if P6=0. With P6=1, the compressor is active even with
the door open and with the fan stopped for a limited time.
The compressor starts depending on the SET-POINT relating to the selected cycle and also depending on the
temperature differential set (Parameter P8).
