background image

14

4  Important Notices

Important safety information

Failure to observe the following safety directives may result in fire, electric shock, injury, or damage 

to the aD5 or to other items or property.

You must read all of the following safety information before you use the aD5.

About the symbols

"Caution": Calls your attention to a point 

of caution

"Do not ...": Indicates a prohibited action

"You must ...": Indicates a required action

About warnings and cautions

WARNING

Indicates a hazard that could 

result in death or serious injury

CAUTION

Indicates a hazard that could 

result in injury or property 

damage

WARNING

Do not disassemble or modify

Do not disassemble or modify this product.

Do not use or store in the following locations

•  Locations of high temperature (in direct 

sunlight, near heating equipment)

•  Moist or humid locations (near a bath or 

shower, or on a wet floor)

•  Locations subject to salt damage

•  Locations subject to water or rain

•  Excessively dusty locations

Do not damage the power cord

Do not excessively bend the power cord or 

damage it. Do not place heavy objects on top 

of the power cord. Doing so may damage the 

power cord, causing fire or electric shock.

Use the included AC adapter

Use only the included AC adapter. Use the 

adapter with the voltage that it specifies.

Turn off the power if an abnormality or 

accident occurs

In the following situations, immediately turn off 

the power, disconnect the AC adapter from the 

AC outlet, and contact your dealer or ATV for 

servicing.

•  If the AC adapter, power cord, or plug is 

damaged

•  If smoke is emitted or an abnormal odor is 

noticed

•  If liquid or a foreign object enters the unit

•  If an abnormality or malfunction occurs in 

the unit

Do not drop or subject to strong impact

Do not drop this product or subject it to strong 

impact.

Do not plug or unplug the AC adapter with 

wet hands

You risk electric shock by doing so.

CAUTION

Grasp the power plug when connecting or 

disconnecting

When connecting or disconnecting the AC 

adapter from the unit, you must grasp the plug 

rather than pulling the power cord.

Don’t use AC outlet multipliers

Doing so will cause the outlet to become hot, 

causing a fire hazard.

If the power plug is dusty, wipe it off

Dust on the power plug can cause electric shock 

or short circuits.

Disconnect the power plug from the AC 

outlet if not using the unit for an extended 

time, or if lightning is expected

Failure to do so may cause electric shock, fire, 

or malfunction.

Disconnect all connections before moving 

the unit

Failure to do so may cause damage to the 

power cord or cables, or may cause people to 

trip over the cables.

Don’t place the unit in an unstable location

Doing so may cause the unit to overturn, 

causing personal injury.

Don’t sit or stand on the unit, or place heavy 

objects on it

Doing so may damage the unit.

You should also avoid applying excessive force 

to the buttons, knobs, and input/output jacks. 

Doing so will cause malfunctions.

Don’t use the unit at high volume for an 

extended time

Using speakers or headphones at high volume 

for an extended time will damage your hearing.

Handle the unit with care

Take care that your hands or fingers are not 

injured by corners or openings in the unit.

Place small parts out of reach of children

Place small parts out of reach of children who 

might accidentally swallow them.

Summary of Contents for aD5

















Reviews: