49
System parameter
SYS: Load LdP2B
LdP2B refers to ‘Load Project to Buffer’.
This function allows you copy tone data from different source locations (Internal Memory 1/2, Factory Presets 1/2, SD
card projects) to a temporary buffer. From this temporary working memory the selected tone data can be copied to
a specified tone destination (TNDest), which corresponds to a group and tone number in the working project that
is currently loaded. This function can be particularly useful when you want to copy tones from different projects to
specific banks in a project you are working on.
When you execute SYS:LdP2B, the project source is displayed on the lower line of the LCD display and you can scroll
through the available projects by the turning the encoder. After making the selection, push the encoder to copy the
project data into the temporary buffer (working memory). The next screen that displays will prompt you to select
a bank and tone number destination for the copy. Use the buttons either side of the display to set the tone
destination. The second line of the display shows the source tone for the copy. To change the source tone that you
wish to copy, turn the encoder.
Ex. Selecting MyPrj2018 in a SD card
Ex. Selecting Factory Init
