background image

 DPX16:  Instructions for Basic Operation and Installation

Page 28

E

QUIPMENT 

R

EQUIREMENTS

The DPX16 is designed to be compatible with all NTSC and PAL compatible equipment. The DPX16 will accept 2:1
interlace cameras in either a “line-locked” or “free running” (internal reference) modes. The use of “random interlace”
camera is not recommended unless the line lock is turned off.

S

PECIFICATIONS

Physical
Dimensions ........................................................................... 16.720” w X 8.250” d X 2.250” h

(425 mm X 210 mm X 57 mm)

Weight  ................................................................................. 7.8 lbs (3.51 kg), Power Supply: 1.0 lbs (0.45 kg)
Operating Temp .................................................................... 32

F - 104

F (0

C - 40

C)

Video
Signal Format ....................................................................... NTSC/PAL Compatible Color or Monochrome

NTSC: 525 lines, 60 Fields / sec.
PAL: 625 lines, 50 Fields / sec.

Camera Inputs ...................................................................... 0.6 to 1.2 Vp-p 75 Ohm Termination
Monitor Output ...................................................................... 1.2 Vp-p into 75 Ohms (S-Video and Composite)
VCR Output .......................................................................... 1.2 Vp-p into 75 Ohms (S-Video and Composite)
Digital Sampling.................................................................... 720 X 480 NTSC, 720 X 576 PAL

4:2:2 (256 Gray Levels, 16 Million Colors)

Refresh Rate......................................................................... 30 Frames Per Second (NTSC)

25 Frames Per Second (PAL)

Electrical
Power ................................................................................... 12 V AC @ 2 Amp
Safety ................................................................................... 110V, 60Hz Power Supply: UL Listed and CSA Certified

220V, 50Hz Power Supply: CE Mark and VDE approved

EMI ....................................................................................... FCC Part 15, Class A

CE Certified EN50081-1 (emissions), EN50082-1 (immunity)

Connectors
Video In ................................................................................ BNC, 1 Per Camera, Terminating, or Hi-Z
Loop Thru ............................................................................. BNC, 1 Per Camera
Monitor Video Out ................................................................. BNC, S-Video
VCR Video In  ....................................................................... BNC, S-Video
VCR Video Out ..................................................................... BNC, S-Video
Serial Port ............................................................................. RJ45, EIA 561
Alarm  ................................................................................... DB15 With Screw On Adapter Board
12 VAC, or 12 VDC............................................................... Power Jack, 0.080” Pin Diameter

Controls
DISPLAY .............................................................................. Return to 4x4 Display
SEQUENCE.......................................................................... Calls Up Selected Sequence Mode
FREEZE ............................................................................... Freeze current display image
PIP........................................................................................ Calls Up Next PIP Mode
QUADRANT.......................................................................... Rotates Quadrant
ZOOM................................................................................... Activates Variable Zoom
VCR ...................................................................................... Enables/Disables VCR Input for Recorder Playback
SIXTEEN CAMERA BUTTONS (1-16) .................................. Calls Up Individual Cameras Full Screen
IR Remote ............................................................................ Duplicates Front Panel Controls
Termination Switches............................................................ Selects 75 Ohm or Hi-Z Termination for Video Inputs

Summary of Contents for DPX16






























Reviews: