DPX16: Instructions for Basic Operation and Installation
Page 29
W
ARRANTY
I
NFORMATION
Thank you for purchasing this Advanced Technology Video, Inc., hereinafter “ATV”, product. We have manufactured this product in
accordance with high quality standards and when it is used in the manner intended, it has a limited warranty against defects in
material and workmanship for a period of five (5) years from the date of shipment from ATV. During the warranty period
ATV’s entire liability and your exclusive remedy shall be, at ATV’s option, upon receipt of proof of purchase, repair or replacement
of products that prove to be defective. Repair of a defective product is contingent upon availability of replacement parts from their
manufacturer. Should ATV be unable to obtain replacement parts, ATV will, at its option, pro rate the value of the defective product
and offer this amount toward the purchase of any new ATV product.
For warranty service or repair, this product must be returned to a service facility designated by ATV. Within the United States, you
must obtain a return authorization (RMA) number by calling (888) 288-7644. Outside of the United States, contact your sales
representative or the ATV factory at 425-885-7000 (email: tech@atvideo.com). For ATV factory service after obtaining an RMA
number, send the product with shipping charges and applicable duties and taxes paid, along with a copy of your sales receipt or
other proof of purchase and date of purchase to the ATV factory address.
YEAR 2000 CONFORMANCE
All ATV products containing a date and time function meet Year 2000 Conformity Requirements as specified in BSI DISC PD2000-
1 (described below). Year 2000 requirements do not apply to ATV products without a date and time function. ATV products’ date
format is “Day – Month – Year” where “Year” is a two digit representation of the year. Conformity is defined as follows:
1.
No value for the current date will cause any interruption in operation of the product.
2.
Date-based functionality within the product behaves consistently for dates prior to, during and after year 2000.
3.
The 2 digit date within the product is implicitly assumed to be greater than 1990.
4.
Year 2000 is recognized as a leap year.
LIMITATION OF WARRANTY
This warranty covers normal use and does not cover damage which occurs in shipment or failure which results from alteration,
accident, misuse, neglect, voltage fluctuations, lightning, water damage (or other acts of God), faulty installation or adjustment of
controls, interfacing with non-standard or custom equipment, or improper maintenance.
EXCEPT AS HEREIN EXPRESSLY SET FORTH AND TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, ATV
OR ANY OF ITS EMPLOYEES SHALL NOT, UNDER ANY CIRCUMSTANCES, BE RESPONSIBLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO, DAMAGE TO THE
EQUIPMENT. ATV MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED INCLUDING, BUT NOT LIMITED TO THE
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-
INFRINGEMENT. REMOVAL OR ALTERATION OF THE SERIAL NUMBER WILL VOID THIS WARRANTY.
FCC S
TATEMENT
This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his
expense.
