HAND-HELD DISPLAY MODULE
ChromaFlex Chassis – Operation Manual
3-9
ATX Confi dential & Proprietary
NOTE: Failing to do so may result in the loss of the setting after a reboot/power cycle.
OPTOut Setting
This menu only appears on CCT1-VO module
.
OPTOut (dBm):
displays the readback of optical output power in dBm. This information is displayed to aide user
while adjusting the output power.
OPTOut(dBm):
adjustment of output power level. Use the right or left to toggle through available options.
Save
: use the right or left bottom to toggle the NVRAM mode to “Yes” to save and press select to store the setting
in the NV RAM.
NOTE: Failing to do so may result in the loss of the setting after a reboot/power cycle.
Tx Status Menu:
This display conveniently presents all available channels in one line.
Opt:
displays the optical output power in dBm to each ITU transmitter channel.
RF
: displays RF input level reading in dB to each ITU transmitter channel.
Mode
: displayed the current mode AGC or MGC.
Alarm Menu:
Laser Temp:
displays the alarm status of laser temperature.
Output Pwr
: displays the alarm status of the optical output power.
RF Level
: displays the alarm status of the RF level.
Module Temp:
displays the alarm status of module temperature.
Status Menu:
Laser Tmp (C):
displays the reading of laser temperature in Centigrade.
RF Lvl (dB)
: displays the reading of RF level in dB.
OPT Out (dBm)
: displays the reading of Optical output power in dBm.
Att (dB)
: displays the reading of attenuation in dB.
Lambda (nm)
: displays the reading of wavelength in nanometer.
Voltage (V)
: displayed the on board supply voltage.
Chassis Menu:
Temp(C):
displays the module’s temperature reading in Centigrade.
Model
: displays the model name of plug-in module.
HW Ver
: displays the hardware version information of plug-in module.
SW Ver
: displays the software version information of plug-in module.
Ser #
: displays the serial number of plug-in module.
Prev Menu:
Press “Select” will bring the plug-in’s greeting message screen back.
CHAPTER 3: