HAND-HELD DISPLAY MODULE
3-14
ChromaFlex Chassis – Operation Manual
ATX Confidential & Proprietary
3.3.2.5 Optical Switch
Level 1
Level 2
Level 3
Level 4
InnoTrans
Optical Switch
Setup
Threshold
Save
Prev Menu
Status
OPin Pwr (dBm)
Mode
Switch
Prev Menu
Alarm
OPin Pwr
Switch
Module Temperature
Prev Menu
Chassis
Temperature (C)
Model
Hardware Version
Software Version
Serial Number
Pre Menu
Pre Menu
Table 6: ChromaFlex Optical Switch Menu Overview
Greeting:
After a valid slot is selected from the option menu of Chassis, a greeting menu of the selected module will be shown; in this
case, it is “Optical Switch”.
Greeting Message:
Press “Select” button to go into the plug-in menu.
Prev Menu
:
Press “Select” will bring back to the System menu.
The entries in plug-in menu are described as follows:
Setup Menu:
Mode:
Select the optical switch mode, the selections are “Auto”, “Manual_Pri”, “Manual_Sec”.
Auto mode, the optical switch decision is per section 3.3.3.5.1.
Manual_Pri: the optical switch position is forced to stay on primary input.
Mmaul_Sec: the optical switch position is forced to stay on secondary input.
ATX Networks
Optical Switch
CHAPTER 3: