FRONT PANEL LCD DISPLAY
4-4
TranScend Chassis – Operation Manual
Channel:
Press “Right” or “Left” button to cycle through available channels.
Enable:
Press “Select” to enable or disable the alarm reporting. Press “Right” or “Left” button to cycle
through the available options.
On:
Report alarms on the selected channel
Off:
Disable alarm reporting on the selected channel
Save:
Press “Right” or “Left” button to select between “Yes” or “No”. Press “Select” to commit the value
into NVRAM when “Yes” is selected. The value in bracket reflects the current NVRAM contents. If user
presses “Select” when display is “No”, no NVRAM change takes place.
Status Menu:
Opt:
Displays the reading of optical receiver power in dBm. This display does not include the reading after the
decimal point.
Alarm Menu:
Rcvr Pwr:
Displays the alarm status of optical receiver power.
Module Temp:
Displays the alarm status of module temperature.
Optical Menu:
Power (dBm):
Displays the optical receiver power reading in dBm.
Attn (dB):
Displays the attenuation setting in dB on per channel basis.
Chassis Menu:
Temp(C):
Displays the module’s temperature reading in Centigrade.
Model:
Displays the model name of plug-in module.
HW Ver:
Displays the hardware version information of plug-in module.
SW Ver:
Displays the software version information of plug-in module.
Ser #:
Displays the serial number of plug-in module.
Prev Menu:
Press “Select” will bring the plug-in’s greeting message screen back.
4.3.2 PON EDFA
Level 1
Level 2
Level 3
Level 4
Greeting
Status
Laser Temperature (C)
Bias (mA)
Optical Input (dBm)
Optical Output (dBm)
Prev Menu
Alarm
Laser Temperature
Optical Input
Optical Output
Module Temperature
Shutoff
Prev Menu
CHAPTER 4:
