FRONT PANEL LCD DISPLAY
TranScend Chassis – Operation Manual
4-1
FRONT PANEL LCD DISPLAY
4. Front Panel LCD Display
4.1 Menu Tree Structure
The TranScend chassis LCD menu is structured into bi-level trees. The top level is system related information and the
second level is plug-in related information. The top level contains the menu for second level, but each has its own menu
structure.
Level 1
Level 2
Level 3
Greeting
Slot
Chassis
Model
Hardware Version
Software Version
Serial Number
Prev Menu
Alarm
Power Supply
Fan
Prev Menu
Prev Menu
Table 1: TranScend Front Panel System Menu Overview
4.2 System Menu Trees
TranScend chassis displays the greeting message upon chassis power up.
Greeting:
Press “Select” button to go into the system menus. The entries in system menus are described as follows:
Slot:
This displays the detected plug-in card type or “Empty” if none is detected. Press “Right” or “Left” button to cycle through
available slots. Press “Select” to show the slot status. If the communication with slot establishes successfully, the display will
go into the second level plug-in menu. Keep in mind that the slot numbering scheme is 1, 2, 3, 4 going from the LEFT when
you are facing the rear of the chassis.
Slot Status:
Module Greeting:
Communication is established with plug-in.
Empty:
No module is detected in the slot.
Failed to Switch:
Cannot establish communication with module.
InnoTrans Communications
Transcend
CHAPTER 4:
