2-2
MDU Solutions
®
– UCrypt
®
IP to QAM – Quick Start Guide
CHAPTER 2: QUICK START GUIDE – READ ME FIRST
2.6 Select Programs for Processing
You first need to define the incoming multicast IP addresses and Ports which contain the incoming programs. Enter the IP
address(es) and associated Port number(s) on the Input Ethernet View tab , click
Save
then click the
Detect Programs
button
to read the Transport Stream(TS) PAT and PMT Tables. Only programs that are in the clear on the input may be selected to be
processed by the UCrypt. Every detected program will have an accompanying drop down dialog box with 3 options:
•
Filter
◦
Program is ignored by UCrypt and not passed to the output.
•
Passthrough
◦
Program is passed to the output without encryption applied.
•
Encrypt
◦
Program is encrypted with Pro:Idiom
®
and passed to the output.
Refer to
for a summary of steps to select programs.
2.7 Configure Output QAM Carriers
You need to specify the QAM output frequencies and Constellation size.
Refer to
to setup QAM carriers.
2.8 Assign Programs to Output QAM Carriers
Finally, the programs that were selected on the Input Ethernet View are assigned to output QAM carriers. Pro:Idiom encryption
is automatically done if that option was ordered.
Refer to
to assign selected programs to output QAM multiplexes.
That’s it, you’re done
If you followed all the
Read Me First
directions, you should have programs on the QAM output channels that you configured.
Use a standard TV to view programs that are in the clear and an appropriate Pro:Idiom compatible TV or STB with built-in
Pro:Idiom to view encrypted programs. Download the full Installation & Operation Manual from the ATX website (atxnetworks.
com) in the Resources & Support section, User Documents sub-section for more details than are presented here. Click the
Help
tab in the UCrypt to link to the manual to your Management Computer.