Model : ATZ HDMI-18E50
Description : 1x8 HDMI Splitter over Cat.6 Extender, w/8x receiver units
pg.
2
Notes
: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be
slightly varied in items of colour, shape from the actual item delivered from time to time.
All specifications are subject to change without prior notice.
© Copyright
Features:
Compliant with HDMI1.3, HDCP 1.2 and DVI 1.0.
Full HD support: 1080p@60Hz@24 bit/pixels.
Supports LPCM 7.1CH, Dolby True HD, and DTS-HD Master Audio.
Operates for TMDS clock frequencies up to 148.5MHz.
Support Power over cable function.
Use single UTP LAN cable (CAT5E/6) to substitute HDMI cable to achieve long distances
transmission.
UTP cable termination follows the standard of IEEE-568B.
Supports EDID control via EDID selector.
Operation Controls and Functions:
POWER LED: This red LED will
illuminate when the device is connected with power supply.
CAT OUT1-OUT8: Eight RJ45 ports provide signal output.
HDMI OUT: Local HDMI loop output port.
HDMI IN: HDMI Input port. Connect source with HDMI cable.
IR OUT: Connect the IR Blaster cable included in the package for IR signal transmission. Pace
the IR blaster in direct line-of-sight of the equipment to be controlled.
EDID : Select output signal format via EDID Selector.
UPDATE: System software update.
