background image

 

 

 
Model          :  
ATZ HDMI-18E50 
Description : 
1x8 HDMI Splitter over Cat.6 Extender, w/8x receiver units 
 

 

 

pg. 

7                                                                

 

Notes

: - All brand names and trademarks are properties of their respective holders and are referred to here for descriptive purpose only. Photo attached is for reference only, it may be 

slightly varied in items of colour, shape from the actual item delivered from time to time.

                                                                                                         

                                                                                                       

All specifications are subject to change without prior notice.   

                                                                                                                                           © Copyright

 

 

 

Wideband IR(30KHz---60KHz) introduction 

IR Cable Pin Assignment 

 

Control local device (Blu-ray player or DVD player, etc) from remote: The IR Receiver is connected to 
the receiver IR in port. The CAT output connector on the HDMI Splitter is connected via CAT6 cable

 

to an HDMI receiver. The IR Transmitter is connected to the HDMI Splitter IR OUT port. 

IR remote can be used to control local source device from remote. 

 

1.Connect a source such as a Blu-Ray Player, game console, A/V Receiver, Cable or Satellite Receiver, 
etc. to the HDMI input on the Transmitting unit. 

2. Connect a display such as an` HDTV or HD Projector to the HDMI output on the Receiving unit. 
3. Connect a single Cat5e/6 up to 164ft/50m to the output of the Transmitting unit, and the other 
end to the input of the Receiving unit. 
4. Connect the DC 12V Locking power supply to the power receptacle on the splitter. 

5. Connect the power supply to an available electrical outlet. 

 

 

 

 

 

 

Summary of Contents for HDMI-18E50











Reviews: