AUDAC ALT4M/B, User & Installation Manual

6

Installing the ALTI

2-Way revolving mounting bracket

The ALTIxM speakers are delivered with a 2-way revolving wall bracket system, allowing 
the speaker for being installed at each location. The wall bracket can be installed in a 
horizontal and vertical direction, allowing the speaker for being focussed into any desired 
direction, even when the installation distance to the wall or ceiling is limited. 

The two-way revolving bracket is made out of die-cast zinc alloy material which ensures 
a solid and secure mounting of the loudspeaker. The wall bracket has to be fixed to the 
wall by four screws. The used fasteners shall be chosen according to the mounting 
surface where the speaker will be installed to (brick, concrete, wood, ...). The holes 
should be provided in a quadrangular shape as shown in following drawing. The mutual 
distance between the holes is 45 x 45 mm. 

Once this part is correctly mounted to the desired location on the wall or ceiling, the 
cabinet can be assembled to the bracket. This is done through inserting the supplied 
bolt (M6) through the hole in the bracket (speaker part) and tighten it into the wall or 
ceiling part.