8
3) Satellite volume control
With this dial, the output level of the satellite channels can be set.
The attenuation of the signal can be set between 0dB and -50dB by rotating the dial.
4) Subwoofer volume control
With this dial, the output level of the subwoofer channel can be set.
The attenuation of the signal can be set between 0dB and -50dB by rotating the dial.
It is important to find a good balance between the high and low tones by using
the Satellite and Subwoofer volume controls. The perfect balance will depend
on the application and on the location. For vocal applications there will be a
different ideal balance than for music applications.
5) Balanced input connections
These euro terminal input connections accept a balanced line level input signal. An input signal can
be fed from a mixing console or other signal source.
To connect the system to a music source with balanced XLR output connectors, or with
unbalanced RCA/Cinch output connectors, the connection cables should be connected according
to the following schematics:
Summary of Contents for SX408A
Page 12: ...11 Block Diagram Chapter 3 ...
Page 16: ...15 Personal notes ...
