ITEM: AOSHEATH
3
Quick Start Guide
3.1
Charging & Powering ON
Connect the Micro USB cable (only use the provided cable) to a
computer USB port or a USB wall charger. Plug the other end of the
micro USB cable into the Micro USB charging port (E) located on the
right side of the microphone. While charging the LED indicator light (A)
will turn RED and then turn BLUE when the battery is fully charged.
Ensure the earphones are turned off, then press and hold the Power/
Mode / Phone button (C) for 3-5 seconds to turn the earphones ON.
The earphones will enter Bluetooth pairing mode automatically and
emit a tone as the LED indicator light (A) will flash BLUE and RED.
NOTE: please refer to the diagram on 2.2
1
2
1
1
2
3-5s
