10
Playback with two DVD players in the car.
Where two players are installed in one car, is possible to transfer image and sound
contained on a disc from the one player to the second. To do this, proceed as follows:
1 Switch both players on.
2 Insert a disc /data carrier into one player and start the playback.
3 Select
Mode - AV IN SEAT
from the menu on the other player.
Note
In this mode, headphones are controlled independently from each other via the respective
player.
Free-standing position
For use outside the car, the portable DVD player can be set upright with the picture stand
on the reverse side.
1 Fit the picture stand into the slot on the reverse side.
2 Swing the tongue out until it clicks into place.
3 Turn the tongue round by 90° and stand the player up.
4 Check that the player is firmly seated.
Folding back the picture stand is done in reverse order.
Day - night brightness adjustment
A day - night sensor is built into the front face of the player. This provides automatic
adjustment of the screen brightness to the ambient brightness with a delay of around
5 seconds.