11
INITIAL OPERATION
Connecting to the power supply
When the portable DVD player is mounted in the car, power is supplied via the contacts on
the carrier.
If you are using the DVD player in a free-standing position, plug the mains adapter into a
socket and the DC plug into the mains connecting socket on the left side of the player. You
can also use the battery as an alternative.
Switching the player On/Off.
The portable DVD player is switched on as follows:
1 Push up the
ON/OFF
switch on the left side of the player.
2 The "Welcome" screen appears. The controls on the front face light up.
The player is ready for use.
Note
When switching on for the first time or after resetting the player settings, the language
selector appears (see "Selecting the language" on page 20).
To switch the player off, push down the
ON/OFF
switch on the left side of the player.
Standby mode
The portable DVD player automatically switches to the standby mode after a few minutes
when there is no playback or operator action. The screen becomes dark and only the
PLAY
/ PAUSE
button remains lit up on the front face.
1 Press
STANDBY
on the remote control or
PLAY / PAUSE
for a few seconds on the
player to end the standby mode.
2 Similarly, the player switches to standby mode if you press
STANDBY
on the remote
control when the screen is lit up or
PLAY / PAUSE
on the player for a few seconds.
