17
PLAYING BACK USBS AND MEMORY CARDS
Inserting the memory medium and playing back files
1 Insert the USB memory stick or memory card into the corresponding connection socket
on the left side of the player (see section "Left and right sides" on page 6).
2 The contents of the memory media are read and displayed as described in section
"Playing back audio titles, images and videos from data CDs" on page 15.
3 To play back the contents, proceed as described in section "Playing back content" on
page 16.
Note
Connection via a USB cable or using memory cards of inferior quality can have a negative
effect on the application.
Switching between several memory media
If several data carriers are inserted or connected into the player, the playback can be
switched between them as follows:
1 Press
MENU
on the player or remote control. The player menu is shown.
2 Confirm the current selection
mode
by pressing
PLAY /
PAUSE
on the player or
RETURN
on the remote control.
3 The sub-menu appears for selecting the data source.
The symbol for the current data source is highlighted white.
4 Move the selection to the desired item by pressing the
and
buttons on the player or
and
on the remote control.
5 Confirm the selection by pressing
PLAY / PAUSE
on the
player or
ENTER
on the remote control.
The information on the selected data carrier is read by the player and
displayed or the playback starts automatically.