18
USING BLUETOOTH HEADPHONES
Establishing a headphone connection
Sound from the player can also be transmitted to a bluetooth headphone via a bluetooth
connection. It is necessary to proceed as follows when connecting for the first time:
1 Switch the headphones on by pressing and holding the symbol
on the phone
designated "R". The green LED on the phone starts to flash.
Note
If the LED doesn't flash, replace the batteries or charge them up via the USB connection.
More detailed information can be found on this in the headphone' user information.
2 In the player menu, select
Bluetooth - New connection
. In the left upper corner
of the display a white flashing bluetooth symbol appears.
3 The player and headphones are creating a connection. This can take a few seconds.
After successful connection, the colour of the bluetooth symbol changes to blue.
4 Close the player menu. The bluetooth symbol will also be faded out.
Note
If the headphones have previously been connected with the portable DVD player then they
will recognise the player and connect automatically every time the DVD player and
headphones are switched on.
Severing the bluetooth connection
Should you wish to severe the connection, there are the following options:
1 Switch off the headphones by pressing and holding on the symbol
on the side
designated "L". The green LED on the phone goes out and the sound is played back
via the player.
2 In the player menu, select
Bluetooth - Bluetooth off
.