23
Charging the battery
To charge the battery, plug the mains adapter into a socket and the DC plug into the mains
connection socket on the battery. When the charging process starts, the status LED on the
battery lights up red. The LED goes out when the charging process has ended.
The battery can be charged while mounted on the player as well as separately.
Note
If the battery is mounted on the portable DVD player and the latter is connected to the
mains via the mains connection socket on the player, no charging of the battery takes
place.
Notes on using the battery
DANGER!
Do not use the battery if it is damaged, deformed or swollen in any
way! This presents a fire and explosion hazard!
Batteries do not belong in the household rubbish! Spent, defective or
damaged batteries must be disposed of properly.
Charge the battery fully before using it for the first time.
The battery becomes warm during the charging process. This is normal.
If the battery becomes too warm or the ambient temperature is more than 30 °C, the
charging time can lengthen or even become impossible. In this case, let the battery cool off
or move to a cooler location before starting the charging process.
Do not recharge a battery which is already fully charged. This can permanently worsen the
battery's performance.