15
Section A – Sweep Volume Control
Your volume control is a Sweep volume
control. To make sounds louder, sweep your
finger from B to A. Each sweep increases the
volume one step until you reach the desired
volume or the maximum setting. To make
sounds softer, sweep your finger from A to
B. Each sweep decreases the volume one
step until you reach the desired loudness or the minimum
setting.
Section B – Touch and Release Volume Control
Your volume control is configured as a Touch and Release
volume control. Each time you touch anywhere on the
control surface the volume of your hearing instrument
changes.
The Touch and Release volume control is configured to
automatically decrease in volume before it increases. To
make sounds louder, touch and release the control surface.
Repeat this motion until you are at the minimum setting.
The next time you touch the control surface, the volume
will increase one step. Continue to touch and release
until you reach the desired loudness. NOTE: If 10 minutes
or more have passed since the last volume change, the
volume will automatically decrease before it increases.
My Control Surface is set for:
Sweep volume control. See Section A.
Touch and Release volume control. See Section B.
Automatic volume control. See Section C.
Multimemory. See Section D.
Sweep volume control and multimemory.
See Section E.
Operation
A
B
Summary of Contents for Anthem
