56
57
Warranty
Technical Specifications
Warranty
The Audient warranty period for any product purchased is 12 months from the date of the original
purchase.
• The warranty is not transferable to a second user.
• Audient products are built using the latest manufacturing technology, tested to the highest
possible standards and by using premium components this should result in providing you with
reliable performance for many years.
• The warranty is return to base, meaning the unit must be returned, carriage paid, to the Dealer you
purchased the unit from or the exclusive territory Distributor responsible for the country in which
you purchased the product
• Some of the products returned under warranty are found not to exhibit any fault at all when they
are retested at our Service Centre’s so it’s always useful to contact our Support team first to try to
avoid inconvenience to you at support@audient.com
• If you suspect that your unit is suffering from a component or manufacturing defect during the
warranty period please contact either Audient support or the dealer that you purchased the
Audient product from
• In the event of a component or manufacturing defect becoming evident during the warranty
period, Audient will ensure that the product is repaired free of charge or replaced
• Whilst this warranty is provided by Audient, the warranty obligations are fulfilled by the exclusive
territory Distributor responsible for the country in which you purchased the product.
• The Dealer will advise you of the appropriate procedure for resolving the warranty issue.
• In every case it will be necessary to provide a copy of the original invoice or Dealer purchase
receipt to the Distributor.
• In the event that you are unable to provide proof of purchase directly then you should contact
the Dealer from whom you purchased the product and attempt to obtain proof of purchase from
them. The Dealer | Distributor will then advise the procedure to follow.
• This limited warranty is offered solely to products purchased from an Authorised Audient Dealer
(defined as a Dealer which has purchased the product directly from Audient in the UK, or one of
our Authorised Distributors outside the UK).
MICROPHONE PREAMPLIFIER:
MIC GAIN:
0 to +60 dB
LINE GAIN:
-10 to +50 dB
PHANTOM POWER:
48v +/-4v @ 10mA/Channel
MIC EIN:
-128dBu
CMRR:
>80dB @ 1kHz
MAXIMUM INPUT LEVEL:
+16dBu
INPUT IMPEDANCE (Mic):
>3kΩ Balanced
INPUT IMPEDANCE (Line):
>10kΩ Balanced
FREQUENCY RESPONSE:
+/-0.5dB 10Hz to 22kHz
CROSSTALK:
<-90dB @ 1kHz & 10kHz
THD+N @ 0dBu (1kHz):
0.003% (-96dBu)
SNR:
96dB A-Weighted
XLR:
Pin 2 (Hot), Pin 3 (Cold) & Pin 1 (Shield)
1/4” JACK:
TIP (Hot), RING (Cold) & SLEEVE (Shield)
D.I:
D.I MAX GAIN:
20 dB
MAXIMUM INPUT LEVEL (at unity gain):
+4dBu
INPUT IMPEDANCE:
1MegΩ Unbalanced
FREQUENCY RESPONSE:
±3dB - 10Hz to 22kHz
THD+N @ 0dBu (1kHz):
1.50%
SNR:
90dB
1/4” JACK:
TIP (Hot) & SLEEVE (Shield)
ADC
INPUTS:
MAXIMUM INPUT LEVEL:
16dBu
DIGITAL REFERENCE LEVEL:
0dBFS = +16dBu
FREQUENCY RESPONSE:
+/-0.5dB 10Hz to Fs/2
CROSSTALK:
<-115dB @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz):
<0.0015%
DYNAMIC RANGE:
115dB A-weighted
SPEAKER
OUTPUTS:
MAXIMUM OUTPUT LEVEL:
+16dBu
DIGITAL REFERENCE LEVEL:
0dBFS = +16dBu
OUTPUT IMPEDANCE:
<100Ω Balanced
FREQUENCY RESPONSE:
+/-0.5dB 10Hz to Fs/2
CROSSTALK:
<-120dB @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz):
<0.0015%
DYNAMIC RANGE:
114dB A-weighted
1/4” JACK:
TIP (Hot), RING (Cold) & SLEEVE (Shield)
HEADPHONE
OUTPUT:
MAXIMUM OUTPUT LEVEL:
+16dBu
DIGITAL REFERENCE LEVEL:
0dBFS = +16dBu
OUTPUT IMPEDANCE:
<50Ω Balanced
FREQUENCY RESPONSE:
+/-0.5dB 10Hz to Fs/2
CROSSTALK:
-90dB @ 1kHz & 10kHz
THD+N @ -1dBFS (1kHz):
<0.002%
DYNAMIC RANGE:
114dB A-weighted
MAX LEVEL INTO 30ohms:
+10dBu, 0.0015% THD+N, 3.7Vpk Power:
456mW or Pavg 228mW
MAX LEVEL INTO 60ohms:
+13.5dBu, 0.0015% THD+N, 5.17Vpk
Power: 445mW or Pavg 222mW
MAX LEVEL INTO 600ohms:
+15.8dBu, 0.0015% THD+N, 6.77Vpk
Power: 76mW or Pavg 38mW
1/4” JACK:
TIP (Hot), RING (Cold) & SLEEVE (Shield)
TO-AMP
OUTPUT:
MAXIMUM OUTPUT LEVEL:
-12dBu
DIGITAL REFERENCE LEVEL:
0dBFS = -12dBu
OUTPUT IMPEDANCE:
<50Ω Balanced
FREQUENCY RESPONSE:
+/-0.5dB 10Hz to Fs/2
THD+N @ -1dBFS (1kHz):
<0.002%
DYNAMIC RANGE:
95dB A-weighted
1/4” JACK:
TIP (Hot) and SLEEVE (Shield)
DIGITAL (TOSLINK) INPUT:
ADAT 8 CHANNELS
44.1 - 48kHz
ADAT 4 CHANNELS (SMUX) 88.2 - 96kHZ
STEREO S/PDIF
44.1 - 96kHz
USB 2.0 HIGH SPEED
No. of INPUT CHANNELS
10 (2 Analogue, 8 Digital)
No. of OUTPUT CHANNELS
4 (4 Analogue)
Connector:
USB Type-C
Included Cables:
1.5m USB 2.0 Type-C to USB Type-C
1.5m USB 2.0 Type-C to USB Type-A
Sono DSP Mixer Round-trip (in to out) Latency:
Without Torpedo Processing
44.1 kHz
0.677ms
48.0 kHz
0.625ms
88.2 kHz
0.354ms
96.0 kHz
0.3236ms
With Torpedo Processing
44.1 kHz
4.63ms
48.0 kHz
4.18ms
88.2 kHz
3.26ms
96.0 kHz
2.99ms
POWER SUPPLY:
12VDC Centre Positive DC Adapter - 2Amps
Internally conditioned to p48VDC, +/-12VDC & low voltage
rails for digital processing core & converters.
Sono cannot be bus powered for quality reasons.
WEIGHTS & DIMS:
Weights: Unit:
1.25kg
Packaged:
2.0kg
Unit Dimensions:
229mm (w) x 67mm (h) x 165mm (d)
Packaged Dimensions:
315mm (w) x 112mm (h) x 226mm (d)
