š
ToneSpot Voice Pro
6
Recommended Workflow
Basic
1. Set the default calibration of the plug-in according to your preferences and working
headroom so the meter shows the signal being around 0
dBVU
2. Choose one of the factory presets
3. Done
Advanced
1. Set the default calibration of the plug-in according to your preferences and working
headroom so the meter shows the signal being around 0 dBVU
2. Choose the Character Type and activate additional Character buttons according desired
flavour
3. Add some valve Distortion and mix it with the dry signal for some extra aggression
4. Add a cup of valve Saturation and mix it with the dry signal
5. Adjust DeEssAir parameters to get rid of unwanted sibilance
6. Adjust Shaping EQ parameters
7. Add some punch into your tone by adjusting Punch compression parameters
8. Do some surgical filtering of unwanted frequencies by adjusting Surgery EQ parameters if
needed
9. Adjust Smash compression parameters to bring your tone under control
10. Add some effects for some extra fun
11. Adjust Finalizer parameters to finally polish your tone
12. Done
