7
6
2 YOUR HEARING AID
2.1 Type
Your hearing aids are behind-the-ear hearing aids.
2.2 Technical features
This user manual applies to the following types:
Detailed acoustic data for your hearing aid can be
found in a separate data specification. This and further
information are available from your hearing care
professional or www.audifon.com.
sino S
kami S
rega S
sino P
kami P
rega P
sino XS
kami XS
rega XS
312
312
312
13
13
13
10
10
10
100
100
100
140
140
140
60
60
60
66
66
66
71
71
71
61
61
61
2.3 Batteries
To start your hearing aids, first insert a battery in the battery
compartment.
Make sure you only use zinc air batteries. Please follow the
instructions on the battery packaging. For the exact type of
battery in your hearing aid please see the overview table.
Always switch your hearing aids off after use. To avoid damage,
remove the battery if you are not using your hearing aids for a
long time.
2.3.1 Information on battery
A zinc air battery is used to supply the power for your hearing
aids. This type of battery is only activated when oxygen comes
through the air holes into the button cell and a chemical
reaction is initiated. During production, the air holes are sealed
with a protective strip.
This ensures the battery remains fresh until use and lasts longer
when it is sealed. Removing the protective strip allows oxygen
to enter and the chemical reaction is initiated.
Refitting the strip when the battery is not in use will not
extend its service life.
Battery should be stored at room temperature. Avoid
keeping them in hot places or rooms with high humidity
(e.g. bathroom). Storage in a cooled location is not
necessary.
Minor to moderate
hearing loss
Minor to profound
hearing loss verging
on deafness
Minor to severe
hearing loss
Model
Indication range
Size
Average service
life (zinc air)
in h
Gain
in dB
Battery
