4
2.0
INSTALLATION
• Connect the 9A60Ato the video source using the supplied VGA cable and
apply power using the included 12 volt power pack.
• Connect the output of the 9A60Ato the YPbPr component video input jacks on
the television or monitor.
• Set up your source equipment to output an appropriate television broadcast
resolution for your region. Common US resolutions are shown below.
SDTV (Standard Definition)
640x480 @ 60Hz
interlaced
480p (DVD Resolution)
640x480 @ 60Hz
progressive scan
720p (High Definition)
1280x720 @ 60Hz
progressive scan
1080i (High Definition)
1920x1080i @ 60Hz
interlaced
1080p (High Definition)
1920x1080p @ 60Hz
progressive scan
Be aware that most high definition televisions accepting progressive (non-
interlaced) video generally have a maximum vertical refresh rate of 60Hz; avoid
sending higher rates from your PC.
Third party software is available for download if your
video driver does not support the required resolu-
tions. Some sources do not provide for altering the
output resolution; in these cases you should consider
purchasing one of the video scaling products (such as
Model 1366) available from Audio Authority.
Caution
:
Do not operate the monitor with an
unstable picture; damage to the display equipment
may result.
VGA
or
RGB
Input
Model
9A60A
Standard
VGA-15
(RGBHV)
Video Cable
Matched Sets of YPbPr
RCA Patch Cords
PC
Power
YPbPr Input
Video Display
Y
Pb
Pr
Software Downloads:
PowerStrip (for Windows)
www.entechtaiwan.com
DisplayConfigX (for Mac)
www.3dexpress.de
Note: Audio Authority
is not affiliated with the
software or companies
mentioned above.
