7
5.2 MACROS TAB
The macros tab allows the user to define
10 custom macros, which will execute
a sequence of commands by activating
only one IR command. The power-off
macro is a predefined macro, which will
execute a power-off sequence which will
power off the PS3 by pressing only one button on the IR remote.
Select macro
Selects which of the 10 macros to edit
Command
Selects which IR command to execute
Duration
Specifies the time in milliseconds to activate the current
command
Pause
Specifies the time in milliseconds to pause until the
next command should be sent
Default
The default button resets the currently selected macro
to its default values
5.3 IR DEVICE CODE TAB
By default the BlueBeam responds to
IR codes from the device code Sony
DVD1a, but this can be changed to
any Sony device code. For ease, it is
possible to select the most commonly
used device codes directly from the
selection box. Make sure that you
have a remote that is able to transmit
the selected codes, or the BlueBeam
will not respond.
If you have an existing Sony DVD
player that conflicts with the default BlueBeam device code, change the device
code from “DVD1a” to “DVD2a” in the selection box and press “Save”. In the
Harmony Remote software, add a new device with the model name “BlueBeam
DVD2a” to allow control of a BlueBeam with the IR device code DVD2a.
A custom IR device code can be entered by selecting the “Custom” entry from
the selection box, and entering the code manually.
5.4 INSTALL MODULE TAB
Allows for future features to be downloaded as a firmware upgrade.
