Introduction:
Thank you for choosing an Audiodesign PRO product.
This active professional 2 way speaker, offers an excellent combination of efficiency , linear frequency response
and compact sizes .
This product is indicated both for indoor and open-air events.
The highlight of this product is the detailed and balanced sound as well as the impressive acoustic transients
speed.
STAGE PA LA 165/6
Tips for use
To take full advantage of this product’s characteristics , we suggest to place it vertically (when necessary, turned
towards the audience)
The bottom of the product has an adapter for a ø 35 mm tube to allow placement upon a suitable speaker stand or
to hang it by means of suitable chains and eyebolts (to be screwed into the 8 fixing holes).
We suggest to combine each enclosure to one of the following subwoofers:
- STAGE PA W 18P 1000 (1000 Wrms active professional subwoofer )
- STAGE PA W18P 1500 ( 1500 Wrms active professional subwoofer)
- STAGE PRO WS18P0 1000 ( 1000 Wrms passive professional subwoofer)
- STAGE PRO WS18P0 1500 ( 1500 Wrms passive profesisnal subwoofer)
In case of outdoor events, we suggest to use 2 subwoofers for each vertical line array enclosure .
Features
The STAGE PA LA 165/6 is equipped with 6 high efficiency 165 mm midwoofers and 1 driver with 44 mm voice coil
and round horn.
It’s also equipped with a 900 WRMS class D amplifier with limiter.
The driver is protected by PTC circuit.
Frequency response: 100 - 20.000 Hz
Size: Width 19 cm, Height 127 cm, Depth 25 cm
Weight: 22,5 Kg
Volume adjustment
To obtain max sound pressure, you have to rotate “VOLUME” control clockwise until , during the musical peaks, the
red “CLIP” led lights up ONLY sometimes and for a fraction of second.
N.B. If the red led stays on constantly, the sound gets distorted and could cause serious damages to the
speakers and / or the amplifier.
PAGE 3
